![]() My core switch/router has all the VLANs defined (I have VLANs for WAN, LAN, Production, Management, Guest, and IoT). In my home network I do not have pFsense acting as my DHCP system, but instead have my WiFi router doing that role (the pFsense system only has access to my WAN VLAN and LAN VLAN ID's and nothing else). In both cases above, do not use DHCP for the WoL, and you don't have to worry about setting the WoL VLAN to route back to the rest of your network (and you don't have to configure in pFsense a new interface/virtual interface for the WoL VLAN). In config 2, you use two connections to your network on both machines. ![]() ![]() You're throwing out across the LAN 'Hey MAC AA:BB:CC:DD:EE:FF wake up plz'. The difference between 1 and 2 above is that in 1, you only use a single physical (layer 2) connection from the system that will be used to wake up the other machine. If you need a remote way, set up a web page on a machine in the local lan that does nothing but call that wakeonlan to keep you mostly safe. if you use 192.168.1.XXX for your primary subnet, use 192.168.10.XXX for the WoL subnet). Again, configure the IP addresses on the new VLAN to be a different subnet than what you currently use (i.e. To achieve this, I set up a UDP relay (GUI menu Configuration IP) for UDP Port 7 to 255.255.255.255 (this should inundate all interfaces with the package). Connect a second NIC from the computer you want to use to wake up the 846 to another port on the switch that is also configured to the WoL VLAN ID. Do not Disable STP in a Layer 2 Network -Root Bridge Place (Per VLAN) -For better convergence use Rapid PVST+ or MST -The lower the root ID the better it. Setup the port from the computer you want to use to send the WoL packet to the 846 to be a port that has multiple VLANs and configure the second VLAN for that NIC in the OS (picking a different subnet than your main network so you don't have to deal with strange routing rules).Ģ) Connect the 846's onboard NIC to a port on the switch and set that port to the new WoL VLAN ID. You can do this one of two ways depending on the capabilities of the switch(es):ġ) Connect the 846's onboard NIC to a port on the switch and set that port to the new WoL VLAN ID. I am not really familiar with those microtik switches, but I suspect they should be capable. The easiest solution would be to create a second VLAN for the WOL capability. Let me know if this was your line of thinking or if you have other ideas. Didn't think about that, but I assume it will work? When you are talking about separate lan, do you mean running a VLAN with one of my clients and that Intel Server NIC? I guess I could assign the Intel NIC it's own VLAN and let the clients that I need to turn on the server just have multiple VLANs set. Everything else in the house runs on 1GbE or Ubiquiti UniFi AP AC Pros throughout the house. ![]() This is really most important for the items in my rack and PCs for video editing and such. What I'm trying to avoid is that the LAN computers connect to the 1GbE instead of the 10GbE. So the Intel NIC would be plugged into the CSS326 and the Mellanox is connected to the CRS317. The WMI class Win32_NetworkAdapter represents all network adapters in a computer.Click to expand.My setup is as follows:ĪT&T Fiber Modem > Dell R210 II (pFsense Firewall) > MikroTik CRS317-1G-16S+ (16 port 10GbE) > MikroTik CSS326-24G-2S+RM (24 port 1GbE, it is linked with the via 10GbE to the CRS317). Examplesīefore you can wake a remote computer, you need to know its MAC address. The function fully supports the PowerShell pipeline and can wake one or more computers.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |